User manual

APS User Manual
126
1.2.6-5 Groups Information
This section displays the learnt MLD groups. The MLD Group Table is sorted first by VLAN ID, and
then by group. They will use the last entry of the currently displayed table as a basis for the next
lookup. When the end is reached the text "No more entries" is shown in the displayed table. Use the
button to start over.
Web Interface
To view the MLD Group Information via the Web Interface:
1. Click Configuration, MLD Snooping and Groups Information.
2. If you want to auto-refresh the information you will need to check the Auto-Refresh tick box.
3. Click Refresh to manually refresh the information.
Parameter Description
VLAN ID: The VLAN ID of the entry.
Groups: MLD group address.
Port Members: Physical Ports on the switch that belong to the MLD Multicast Group.
Auto-Refresh: Tick the box to enable the information to be automatically refreshed.
Fig. 57 MLD group information