User manual

APS User Manual
111
1.2.5-4 Status
This section is used to view the status of all configured IGMP parameters on the APS Series switches.
Web Interface
To view the IGMP Status via the Web Interface:
1. Click Configuration, IGMP Snooping and Status.
2. If you want to auto-refresh the information you will need to check the Auto-Refresh tick box.
3. Click Refresh to manually refresh the information.
Parameter Description
VLAN ID: The VLAN ID of the entry.
Querier Version: The current version of the IGMP Querier.
Host Version: The current version of the host.
Querier Status: Shows the Querier status of either “Active” or “Idle”.
Queries Transmitted: The number of transmitted queries.
Queries Received: The number of received queries.
Fig. 50 IGMP Status