Install guide

AMS Quick Install Guide
16
2. Mount the device in the rack using four rack-mounting screws (not provided). Be sure to
secure the lower rack-mounting screws first to prevent the brackets from being bent by the
weight of the switch.
3. If installing a single switch, turn to “Connecting to a Power Source” at the end of this chapter.
4. If installing multiple switches, please follow steps 1 and 2 for installation of the other
switches.
Desktop Mounting
1. Attach the four adhesive rubber feet to the bottom of the switch.
2. Set the device on a flat surface near an AC power source, making sure there are at least two
inches of space on all sides for proper air flow.
3. If installing a single switch, turn to “Connecting to a Power Source” at the end of this chapter.
4. If installing multiple switches, please follow steps 1 and 2 for installation of the other
switches.