User manual

NANO 2 – Additional Features
User Manual v2.8
www.allo.com
46
behind NAT).
5.5.4. Misc
Navigation: General Settings > SIP settings > Misc: This is where you can configure the
miscellaneous sip settings.
The details to be filled are given as:
FAX Settings
FAX Format
Select the FAX format either in TIFF or PDF
T.38 fax (UDPTL)
Enables T.38 Fax Mode otherwise pass-through mode is enabled
Pass-through
Make sure that baud-rate(fax speed) must be set 9600 in fax
machines when pass-through mode is enabled.
Fax Email ID
Assign the Email Address to which the FAX attachment has to be sent
Fax Destination
Select the Destination where fax must be received.
Fax Detect TimeOut:
Specify the time for which the FAX has to be detected.
Out Bound SIP Registration Settings
Register
Register as a SIP user agent to a SIP proxy (provider)
Register Time-Out
Configure the register retry timeout (in seconds). The default setting is
20.
Register Attempts
Configure the number of registration attempts before the Nano2PBX
gives up. The default setting is 0, which means the Nano2PBX will
keep trying until the server side accepts the registration request.
Video Settings
Max Bit Rate
Configure the maximum bit rate (in kb/s) for video calls. The