User manual

NANO 2 – Additional Features
User Manual v2.8
www.allo.com
42
• Once the web page comes back to the login page again, enter the new password to
login.
Date &Time Settings: You can set the date and time of the Nano2PBX either through
Enabling NTP or by manual entry. If you are enabling NTP, select the time zone according to
your country timing and enter the ntp server details.
Enable NTP
Enabling NTP allows you to set the Time zone and Date based on the
NTP server provided
Time Zone
Select the proper time zone option so the Nano2PBX can display the
correct time accordingly.
NTP Server
Specify the URL or IP Address of the NTP server for the Nano2PBX to
synchronize the date and Time. For Eg: pool.ntp.org
Email Settings:
The Email application on the Nano2PBX can be used to send out Emails to users
with Fax (e.g., Fax-To-Email), Voicemail (Voicemail-To-Email) and other information
as attachment.
Email Settings
SMTP
The IP Address or domain name of the SMTP server
SMTP PORT
The port number at which SMTP server is running. Generally
SMTP port No is 25
AUTH User
Authorized username of the Admin Email ID
AUTH Password
Authorized password of the Admin Email ID
Admin Emailed
Specify the Administrator Email ID.
TLS Support
TLS setting to require mail to be transmitted via a secure
connection when users correspond with specific domains and
email addresses.
Auth Login
Enable this option act as Auth login for SMTP Authentication