User manual

NANO 2 – Additional Features
User Manual v2.8
www.allo.com
40
Enable DND
Default code: *78
This is the code to enable DND for a particular Extension so
that it will not accept any calls.
Disable DND
Default code: *79
This is the code to disable DND for a particular Extension so
that it will accept calls.
Enable Call Duration
Call Duration Timeout
It is the maximum timeout for an outgoing FXO call for which
the call is established.
5.4. Admin Settings
5.4.1. General Preferences
Navigation: Admin Settings> General Preferences: This is where you can configure the
General Settings of the Nano2PBX
General Preferences
Global Outbound CID
Configure the global CallerID used for all outbound calls when no
other CallerID is defined with higher priority. If no CallerID is defined
for extension or trunk, the global outbound CID will be used as
CallerID.
Global Outbound CID
Name
Configure the global CallerID Name used for all outbound calls. If
configured, all outbound calls will have the CallerID Name set to this
name. If not, the extension's CallerID Name will be used.
Operator Extension
Specify the operator extension, which will be dialed when users
presses 0 to exit voicemail application. The operator extension can
also be used in IVR option.
Ring Timeout
Configure the number of seconds to ring an extension before the
call goes to the user's voicemail box. The default setting is 20.