User manual

NANO 2 – Additional Features
User Manual v2.8
www.allo.com
38
5.2.3. Host Configuration
Host Configuration is used to manage your Nano2PBX’s Host Name.
Host Name: Used to name the device to identify inside the LAN network. This field is
optional but may be required by some Internet Service Providers or system administrators.
When you are finished applying Network Settings, click the Update button.
5.3. Feature Settings
Navigation: > Call Features is where you can configure the Call feature settings for the
extensions.
Feature digit time out, maximum time (ms) between digits for feature activation (default is
1000 ms)
Call Parking Settings
Extension to Dial to Park a Call Default Extension: 700.
•During an active call, initiate blind transfer and then
enter this code to park the call.
Extensions for Parked Calls Default Extension: 701-720.
• These are the extensions where the calls will be parked,
i.e., parking lots that the parked calls can be retrieved.
Parked Call Timeout (in secs) Default setting: 1000.
• This is the timeout allowed for a call to be parked. After
the timeout, if the call is not picked up, the extension who
parks the call will be called back.
PBX Feature Prefixes: This lets the user assign the codes for different features present in
the NANO2PBX.
Feature Map
Blind Transfer
Default code: *1
• Enter the code during active call. After hearing "Transfer", you
will hear dial tone. Enter the number to transfer to. Then the
user will be disconnected and transfer is completed.