User manual

NANO 2 – Setting up Features

User Manual v2.8

www.allo.com

A Incoming Calling Rule is an rule which route the incoming call to phone number. Incoming

Calling Rule is a feature that enables incoming calls to be routed directly to selected stations

without attendant assistance.

Incoming Calling Rule Details

Incoming Calling Rule Configuration Parameters

Trunk Select the trunk to configure the inbound rule.

Time Interval Select the time interval from the list specify the time for the

trunk to use the inbound rule.

Pattern All patterns are prefixed with the "_".

X: Any Digit from 0-9.

Z: Any Digit from 1-9.

N: Any Digit from 2-9.

".": Wildcard. Match one or more characters.

"!": Wildcard. Match zero or more characters immediately

Destination

Select the default destination for the inbound call

• Extension

• User’s Voicemail

• Conference Rooms

• Voicemail Group

• IVR

• Queues

• Hang-up

4.13. DID Routing

Navigation: SETUP ÆDID Routing

Direct Inward Dial. A specially configured phone line from the telephone company that allows

for dialing inside a company directly without having to go through an attendant. A DID line

cannot be used for out dial operation since there is no dial tone offered. However, it can be

configured so an outside caller can reach an inside extension with a 7-digit number through

the phone company's central office.