User manual

NANO 2 – Setting up Features
User Manual v2.8
www.allo.com
21
4.5. Dial plans
Navigation: SETUPÆDial plans: This is where you configure Dial plans for the users.
A Dial plan is a collection of outgoing rules. Dial plan are assigned to users to specify the
dialing permissions they have
For Example: you might one Dialplan for local calling that permits the users of that DialPlan
to dial local numbers, via the “local” outgoing calling rule. Another user may be permitted to
dial long distance numbers, and so would have a DialPlan that includes both the “local” and
“log distance” outgoing calling rules.
You have to create the Dialplan first before you create any user accounts to make your call
successful. The Dialplan details are as follows.
Dialplan Name: the name user wish to see in that field of Dialplan.
Include Outgoing Calling Rules: when the outgoing Calling rules are created it displays
here so that to include it in the dialplan.
Include local contents: here the user can select the features which he wishes to use.
After all the changes, click on the save button. And don’t forget to click on apply changes
button on top navigation bar immediately after save button.
Important Note:
1. Dial Plan can be created only for admin (including daynight switch, sayip ..etc). The
default dial plan 1 will be having full access to all feature codes.
4.6. Time Intervals
Navigation: Time Intervals: This is where you can create/edit /delete Time intervals for the
scheduling of the incoming calling rules. The time intervals Details are given as: