User manual

NANO 2 – Setting up Features

User Manual v2.8

www.allo.com

Calling Rule Name Configure the name of the calling rule (e.g., local, long-distance, and

etc). Letters, digits,etc.

Pattern All patterns are prefixed with the "_".

X: Any Digit from 0-9.

Z: Any Digit from 1-9.

[12345-9]: Any digit from 1 to 9.

N: Any Digit from 2-9.

".": Wildcard. Match one or more characters.

"!": Wildcard. Match zero or more characters immediately.

Caller ID Name Configure the CallerID Name associated with the FXO trunk

You can even use the Calling rule to route it to local extensions as Destination or Route the

calls to Trunks created so as to make the calls successful. There as still many options like

striping the number of digits from front, prepend the digits before dialing and filter. There is

also another alternative way if the trunk fails to route the call i.e. Failover Trunk an

alternative trunk to route calls.

Send this call through trunk

Use Trunk Select the trunk for this outbound rule.(FXO/VOIP Trunk)

Strip Allows the user to specify the number of digits that will be

stripped from the beginning of the dialed string before the call

is placed via the selected trunk.

Prepend Specify the digits to be prep ended before the call is placed

via the trunk. Those digits will be prepended after the dialing

number is stripped.

Filter This option is used to filter out certain characters. The

characters listed in the field will be permitted, while all others

will be filtered out.

Here we will discuss about how to choose outgoing trunks in two different ways.

The First way is, choose a provider or a trunk based on prefix.

This type of rule will allow user to create a prefix for choosing SIP (VoIP) or LINE (PSTN /

FXO) trunk to make an outgoing call.