User manual

NANO 2 – Setting up Features
User Manual v2.8
www.allo.com
13
directly. It is not always possible for the Nano2 to negotiate
endpoint-to-endpoint media routing. The default setting is
"No".
Insecure Port: Allow peers matching by IP address without matching
port number.
• Very: Allow peers matching by IP address without matching
port number. Also, authentication of incoming INVITE
messages is not required.
• No: Normal IP-based peers matching and authentication of
incoming INVITE.
The default setting is “No".
Advanced Options
In Directory Check this option if the user is to be listed in the system
telephone directory
Is Agent Check this option if this user is a call queue member
Incoming Call record Record the incoming calls
Note: calls with G722 and G729 codecs don’t record
Outgoing Callrecord Record the outgoing calls
Note: calls with G722 and G729 codecs don’t record
Pickup Group Select a Pickup Group where a phone picksup the incoming
call if it matches one of the call’s call groups.
Important Note:
The Incoming/ Outbound calls with G722 and g729 codec won’t be recorded
4.2.2 Modify/Delete selected users
Navigation: Users: This is where you can edit / delete existing Analog/IP Extensions
individually.
On the right side of the page, you can see the list of extensions you have setup. To edit, or
delete any of them, simply click the appropriate icon provided to the right of each
account/Extension.