User manual

NANO 2 – Setting up Features
User Manual v2.8
www.allo.com
12
be limited by your VoIP provider.
Enable Voicemail for the User: Enable this extension so that it can be visible when adding
members to the Voicemail Group and Voicemail. The Voicemail PIN password will be same
as the password provided to the Extension while creating an Extension. This will applies to
both Analog and IP Extension. If you are trying to access or retrieve Voice Message, use
that particular Extension password.
Email Address: Mail address which the user wishes to receive mails (for Voicemail)
VoIP Settings
SIP Password Configure the password for the user.
NAT Use NAT when the Nano2PBX is on a public IP
communicating with devices hidden behind NAT (e.g.,
broadband router). If there is one-way audio issue, usually it's
related to NAT configuration or Firewall's support of SIP and
RTP ports.
Can Reinvite By default, the Nano2PBX will route the media steams from
SIP endpoints through itself. If enabled, the PBX will attempt
to negotiate with the endpoints to route the media stream