User manual

NANO 2 - Getting Started
User Manual v2.8
www.allo.com
8
Or also you can access the GUI of the Nano2PBX by connecting a PC to the LAN port of the
Nano2PBX. Enable the DHCP option in the Network Settings of the PC, and then enter
http://192.168.113.1:8088
in the Web Browser Address field. (Where 192.168.113.1:8088 is
the default local LAN IP address of the Nano2PBX).
On the login screen, the default username and password is “admin” and “admin”
respectively. Press the Login button to enter the Nano2PBX web panel. To change the
password, please refer to the General Settings > Admin Settings Æ PBX Settings section
in the navigation.
Important Note:
The nano2 comes with default credentials admin/admin you have to change these as soon
as possible to avoid getting hacked. Allo.com cannot be held responsible for unauthorized
access to the nano2 PBX. Please make sure you secure your PBX by placing it behind a
firewall and changing passwords with frequency. Kindly avoid using multiple login to the GUI.