1. Installation Requirements 1.1. Package Contents Analog Telephone Adapter (CRA-210) Ethernet Cable (RJ45) 1.2. Standard Telephone Cable (RJ11) Power Adapter You will also need the following: 1.2.1. 1.2.2. 1.2.3. 1.2.4.
Front Panel Back Panel 1.3. Hardware Installation To install the Analog Telephone Adapter (ATA) follow these instructions. 1.3.1. Connect the Ethernet Cable (RJ45) into the WAN port of the ATA unit, as seen below: 1.3.2.
1.3.3. Connect the Standard Telephone Cable (RJ11) into the phone port labeled PHONE1 (FXS1 below) as seen below (If you have a secondary account, or T.38 Fax line, you can plug another phone or fax machine into PHONE2): 1.3.4. Connect the other end of the cable to your telephone 1.3.5. Connect another Standard Telephone Cable into the phone port labeled LINE (FXO above) (this is to connect your PSTN line, if you wish to use your Landline) 1.3.6.
2. Accessing Your ATA Web Panel Your ATA Web Panel will allow you to check the status of your account, modify network and SIP settings (if you have purchased an Unlocked ATA), and upgrade your ATA's Firmware. 2.1. To access your ATA Web Panel, follow these simple guidelines: 2.1.1. 2.1.2. 2.1.3. 2.1.4. 2.1.5. With your ATA connected, pick up your telephone’s receiver and press ** (Star key, twice). You will hear a woman’s voice giving you an IP Address.
3. Upgrading Your ATA’s Firmware Keeping your ATA up-to-date is very important, especially when we release new features and modify existing ones. To upgrade your Firmware, login to your ATA Web Panel using the steps described in point (2) above, and then use the steps below: 3.1.1. 3.1.2. 3.1.3. 3.1.4. 3.1.5. 3.1.6. 3.1.7. 3.1.8. 3.1.9. 3.1.10. 3.1.11. 3.1.12. 3.1.13. 3.1.14.
4. Warranty Information One Year Limited Hardware Warranty Allo.com provides a one (1) year hardware warranty. Allo.com warrants to customer that this product will conform to its published specifications and will be free from defects in material and workmanship at the time of delivery and for a period of one year thereafter. Without limiting the foregoing, this warranty does not cover any defect resulting from, (i.) any design or specification supplied by an entity other than Allo.com, (ii.
5.2.6. 5.2.7. If your telephone causes harm to the telephone network, the telephone company may discontinue your service temporarily. If possible, they will notify you in advance. But if advance notice is not practical, you will be notified as soon as possible. You will be advised of your right to file a complaint with the FCC Your telephone company may make changes to its facilities, equipment, operations or procedures that could affect the proper operation of your equipment.
