User manual

MegaPBX- IP Phone Configuration
59
User manual V2.0 www.allo.com
9.4 BLF (Busy Lamp Field) Support
MegaPBX supports BLF, which sends information about other extensions to a phone connected
to the same PBX to inform the status.
By default BLF Support is enabled. This feature is used by a receptionist or secretary for routing
incoming calls.
9.5 Hard Reset
A reset button is provided in the back panel of MegaPBX. This will hard reset the MegaPBX.
Press and hold the red button for 5-6 seconds, so that the MegaPBX will reset to factory
settings.
9.6 Memory Card Handling
When handling a memory card, do so without touching the contacts on its edge. Make sure the
card faces the correct direction if you are inserting it into MegaPBX memory card slot. Never
force it into the slot. If it fails to insert into the slot fairly effortlessly, make sure it’s facing the
right direction. Power-off MegaPBX before inserting or removing memory card.