User manual

MegaPBX- Feature Handling
47
User manual V2.0 www.allo.com
Ping Test: It is used to check the packet loss and latency time from your SIP end client like IP
Phone/ FXS gateways to check the quality of your network connections. Enter the ip address of
the IP Phone in your LAN and enter “ PING” Button, it will displays similar to like this:
Trace route Test: It is used to determine the route taken by packets across an IP network.
Format SD Card: This will allow you to completely erase all the contents in the SD card.
Important Note: If you are formatting the SD card details, kindly take the back of the MegaPBX
configuration. Kindly Refer Page No: