User manual

User manual V2.0 www.allo.com

1. Pickup: This feature code is to pick up the ringing extension from another extension if

the party is not available in the desk. By Default Feature code is “*9”.

For Eg if *9 is your call pick up code , by dialing *91002 from any other extension you

can attend 1002 phone extension is ringing

2. Conference: Using this feature code you can enter into the conference room. By Default

the Feature code is “*900”, i.e. Dial *900 from your phone. It will prompt you for the

Conference Number and the PIN and it will let you enter into the conference room.

3. Dynamic Conference: Using this feature code you can enter into the conference room.

By Default the Feature code is “*901”, i.e. Dial *901 from your phone. It will prompt you

for the Conference Number and the PIN and it will let you enter into the conference

room. To add users into the conference *0 then followed by extensions.

4. Voicemail: This is to assign the code for accessing the voice mail. This will allows end-

users to change their personal settings for voice mail handling. By dialing to this number,

any users who are registered to MegaPBX can access the Voice Mail. i.e dial *800 from

your phone and follow the instructions.

5. Directory: Using this Feature code you can dial the other extension with first and last

name configured in the PBX

Call Parking Settings:

1. Parking: Using this feature code you can park the number of calls. By Default the

Feature code is “*700”. i.e. park a caller by dialing *700 by using transfer button on your

phone and will announce parked number 701.

2. Parked: Using this feature code you can retrieve the parked calls. By Default the Feature

code is “701”. To retrieve the call, the user can go to any phone in the group and dial the

parked number “701”. Then call will be retrieved and connects to the retrieved user.