User manual

35
User manual V2.0 www.allo.com
Example 2: Voice file with Key press
Press 1 for Customer Service
Press 2 for Sales
Press 0 for Reception”
With the MegaPBX, you can either upload an existing voice file, or record your own. Accepted
formats are: .wav format only.
4.2.1 Record/upload Voice File:
By clicking on the ADVANCED > Voice Files > Record / Upload a Voice File link on the left
side navigation of the MegaPBX menu, we reach this section:
To upload a Voice File, enter the Name and Description, and click the Browse button to select
the pre-recorded file from your computer. The file should be in WAV Format. After this, you may
enter Key press Information if you like (see Key press section for more info). When done, press
the “Create” button.
To record a Voice File from MegaPBX, check the Recording Option, and select the extension
you wish you use from the list, then press the “ADD “button, it will ring the selected extension
and allow you to record your voice through this extension for maximum of 1 minute.
After answering the call a prompt will be played indicating you to start recording with beep
sound once you have finished recording, press the # button. It will play back the voice recording
on your telephone and hung up the phone.
Add Key press Information (see Key press section for more info). When you are done,
click”Create” Button. The file will automatically be saved as an .Ulaw file, and be stored on the
SD Card in your MegaPBX.
Important Note: You can upload the voice file up to 5 MB (Max) and it should be .WAV format