User manual

MegaPBX- Setting up features
31
User manual V2.0 www.allo.com
server IP address or domain name in the STUN Server field. For a list of public STUN servers,
please Refer to: http://www.voip-info.org/wiki/view/STUN
External IP: Enter the NAT Traversal IP address i.e. Public IP Address of your internet , to
communicate with Public Network when MegaPBX is behind the NAT. This IP address will
substitute in all outgoing SIP messages instead of Local IP address.
Click on “APPLY “button, followed by “SAVE ALL” button to update the configuration changes.
Call Recording Configuration:
Enabling the call recording: It will store the live voice streams in the server database. Please
mention the server IP address in “server address” field
Note: Make sure you enable recording for extension for which you want to record voice packets.
3.9 Network Services:
By clicking on the SETUP > Network Services link on the top navigation of the MegaPBX
menu, we reach this section:
SIP Port: The local listening UDP port for SIP messages. By default 5060
RTP Port Range: MegaPBX will start listening for media transfer on ports 16001 to 17000.
Make sure you configure this dynamic range of ports on your NAT Router. When the MegaPBX
is behind a NAT and the NAT is configured to do port forwarding with above mentioned port
range for UDP ports.
UDPTL Port Range: By default port range is 17000 to 18000 and it is used for T.38 FAX relay
Click on “APPLY “button, followed by “SAVE ALL” button to update the configuration changes.
3.10 Date/Time Configuration:
By clicking on the SETUP > Date/Time Configuration link on the top navigation of the
MegaPBX menu, we reach this section:
Time Zone: Select the correct time zone for the location where the MegaPBX is installed using
the Time Zone dropdown box.
Manual Configuration: Input the proper date and time.