User manual

MegaPBX- Setting up features
29
User manual V2.0 www.allo.com
Click on the “Create” followed by “Save all” button to update in configuration.
3.7.3 Manage Time Route Groups:
Administrator can edit or delete the Manage Time Route group in this configuration page.Click
on “Save “button, followed by “Save all” button to update the configuration changes.
3.8 Network Settings:
The Networking Setting sub menu allows users to configure the LAN-side IP address and DHCP
Server settings, as well as the WAN-side settings like IP address of the WAN port.
By clicking on the SETUP > Network Settings link on the top navigation of the MegaPBX
menu, we reach this section:
WAN Configuration: Are the Internet settings of your MegaPBX.
1. DHCP: when enabled and a DHCP server is available, the MegaPBX will auto
configure itself. If DHCP is not available, select “Static”, and fill in the Network
Configuration
2. IP Address: the IP address corresponding to your WAN configuration*
3. Net mask: the Net mask corresponding to your WAN configuration*
4. Gateway: the IP address corresponding to your Gateway*
5. DNS 1: the IP address corresponding to a DNS server*