User manual

MegaPBX- Setting up features
24
User manual V2.0 www.allo.com
dialed to determine the caller's destination. Every setup that will accept incoming calls will have
at least one incoming route. In larger setups, individual users or departments may get their own
DID numbers.
3.5.1 Add a New DID:
By clicking on the SETUP > DID Routing > Add a New DID link on the left-hand side MegaPBX
menu, we reach this section:
DID Number: This specifies the phone number the calling party dialed in order to reach you,
which is provided by the VoIP Service Provider
Route To: The final step in configuring the incoming route is setting the destination. The
destination for any inbound call can be a IVR, extension, voicemail, Call Queue or any other
currently available destination.
Click on the “Create” followed by “Save all” button to update in configuration.
3.5.2 Create DID range:
By clicking on the SETUP > DID Routing > Create DID Range Extensions link on the left-
hand side MegaPBX menu, we reach this section:
DID Range: Specify the range of the DID numbers provided by the Service Provider.
Extensions: Specify the starting number of the SIP extension, which is to be mapped with the
DID numbers and click on Map.
Click on the “Create” followed by “Save all” button to update in configuration.