User manual

MegaPBX- Setting up features
23
User manual V2.0 www.allo.com
DTMF Mode: You can enable/Disable the Email alerts on arrival of new voicemail & MWI
Features: You can enable/Disable NAT, FAX and DID Routing
NAT: It should be check if the device is behind a NAT router. Enable this option to
avoid NAT Traversal issues.
Fax: If it is checked then T.38 supported, if unchecked only FAX pass through is
supported.
DID Routing: This field is used to route incoming calls when a DID (Direct Inward
Dialing #) is used instead of the account ID. It is very helpful when there are several DIDs
related to the same (static) trunk provided by your SIP Trunk Service Provider.
Codec Configuration: This field allows you to enable a Codec's according to your preference.
Click on the “CREATE” followed by “SAVE ALL” button to update in configuration.
3.4.3 Manage SIP Trunk Group:
Administrator can edit or delete the Extension group in this configuration page.
Click on “Save “button if you have edited the Extension groups, followed by “Save All” button to
update the configuration changes.
3.5 DID Routing
Inbound routing takes incoming calls and routes them to their destination. It is also known as
DID or Direct Inward Dialing. Inbound routing is based on the phone number the calling party