User manual

MegaPBX- Setting up features
19
User manual V2.0 www.allo.com
Make sure to click the SAVE ALL button in the top navigation bar, after adding / editing /
deleting any Extension. The SAVE ALL tab turns Orange if some changes are made and not
saved.
Configuring our First SIP Client:
With our extension created, we now need to configure a device to talk to MegaPBX. Any SIP
device will do; but for a quick test, we will configure Counter path’s (http://counterpath.com
) X-
Lite Soft Phone. The first time we run X-Lite, it will open up the SIP Proxy settings for us to enter
the server information. Using our server and extension information, configure X-Lite as follows
(leaving any unmentioned options at their defaults):
Feature Configuration
Enabled Yes
Display Name Any Name
Username Extension Number
Password Extension Secret
Authorization user name Extension Number
Domain IP Address of MegaPBX
Once we have all the options set, close the windows and X-Lite will attempt to connect to our
server. If everything is set properly, X-Lite will tell us that we are logged in and display our
extension number.