Specifications

1.2 NanoPBX Technical Specifications
PBX Features: Codec: G.711 A-law & μ-law, G.723, G.729
Call Forwarding
Holding and retrieval Fax: T.38, Pass-through
Call Transfer - Attended and Blind
3-way Conference DTMF: RFC 2833, In-band, SIP Info
Call Parking, Pickup and Retrieval
Remote Voice mail Access System Capacity & Expandability:
Recordable IVR Prompts Supports up to 50 IP Extensions
Multilevel auto attendant with IVR 8 TDM concurrent calls (6 G729)
Intercom 20 IP concurrent calls
Configurable Call Routing
- Least Cost Routing
- Call Route to Multiple Extensions or Targeted User
- Call Hunting - Sequential, Round Robin, Random
TDM + IP scenarios:
8 TDM + 3 IP
4 TDM + 8 IP
0 TDM + 20 IP
Multiple Music on Hold Stacking: Double the capacity of NanoPBX
Call Queue
Direct Inward Dial (DID) routing Internet:
Caller ID Spoofing DHCP server on the LAN side
Busy Lamp Field (BLF) DHCP client on the WAN side
Regional Caller ID & Country Settings STUN/NAT traversal (RFC 3489)
CDR(Caller ID, Time/Date Incoming, Outgoing,
Missed)
SIPv2 - Session Initiation Protocol Version
2 (RFC 3261, 3262, 3263, 3264)
Voice Features: Host Name Config
Echo cancellation (G.168) System Management:
VAD with silence suppression WEB interface accessible from LAN & WAN
CNG Password control
Packet loss concealment Backup and Restore of configuration
Adaptive jitter buffer Software Upgrade
Signal discriminator Factory Reset
Attenuation/Gain adjustment Date & Time Configuration
1.3 Hardware Specifications
Telephone Interfaces (FXS/FXO)
• Phone 1 – FXS
• Phone 2 – FXS
• Phone 3 – FXS
• Phone 4 – FXS
• Phone 5 – Programmable (FXS / FXO)
• Phone 6 – Programmable (FXS / FXO)
• Line 1 – FXO
• Line 2 – FXO
Network Interfaces One 10/100Mbps WAN Port
One 10/100Mbps LAN Port