User manual

CRA-210 User Manual Guide
_______________________________________________________________________________
Page: 6 of 30
2.2. Back Panel Ports
The Phone Adapter’s ports are located on the back panel.
Figure 2-1: Back Panel
PHONE Port: For your Internet phone line, this port allows you to connect your
telephone or fax machine to the Phone Adapter using an RJ-11 telephone cable
ETHERNET Port: The ETHERNET port allows you to connect the Phone Adapter to
your router or gateway using a Category 5 Ethernet network cable.
POWER Port: The POWER port is where you will connect the included power
adapter.
RESET BUTTON: To restore CRA-210 into factory default settings. It will change
the configuration back to factory settings, including network settings.
2.3. The Front Panel
The Phone Adapter’s LEDs are located on the front panel.
Figure 2-2: Front Panel