User manual

CRA-210 User Manual Guide
_______________________________________________________________________________
Page: 29 of 30
4.3.4. 3-way Conferencing
Assuming that A party wants to bring B and C party in a conference:
1. A party press “ * 9 * ” to create conference.
2. A party dials the B’s party number followed by “*”, then A party and B party
both of them will be in the conversation.
3. If A party wants to bring C party, then A party has to call C party number followed
by a “ * ”, (Note: In the mean while B party will be on Music on Hold).
4. Once the C party answers the call, B party will bring in the conference.
5. If C party does not answer the call, A party can talk to B party.
5. Compliance and Safety Information
5.1. Installation Precautions
5.1.1. Never install the device during a lightning storm
5.1.2. Never install Telephone or Ethernet jacks in wet locations unless the jack
is specifically designed for wet locations
5.1.3. Never touch un-insulated Telephone / Ethernet wires or terminals unless
the line has been disconnected at the network interface
5.1.4.
Use caution when installing or modifying Telephone / Ethernet lines
To prevent fire or shock hazard, do not expose this product to rain or any type of excess
moisture. If accidentally dropped into water, the Power Adapter should immediately be
un-plugged from the wall along with the Telephone and Ethernet cables.
5.2. FCC and CE Notice
5.2.1.
This equipment has been tested and found to be in compliance with the
limits for a Class B Digital device in accordance with the specifications in
part 15 of the FCC rules
5.2.2. This device has also been granted a registration number by the FCC under
part 68 rules and regulations for direct connection to the telephone lines