User manual

CRA-210 User Manual Guide
_______________________________________________________________________________
Page: 16 of 30
The table below lists the WAN Setup of CRA-210
WAN Setup
WAN Configuration
Automatic configuration
via DHCP Server
It automatically takes IP addresses and other network
configuration information (subnet mask, broadcast address,
etc) from DHCP Server
Using ISP Account (PPPoE)
User Name
It is a PPPoE username. Fill this field if your ISP requires you
to use a PPPoE connection.
Password PPPoE account password.
Enable Keep Alive Timer Enable to keeps your Internet connection alive.
Using Static IP
If Static IP mode is selected, then assign the IP address, Subnet
Mask, Default Router IP address, Primary DNS, Secondary
DNS fields.
MAC Address Clone
Allow user to set a specific MAC address. Set in Hex format.
4.2.3.3. Port Forwarding and Firewall
Figure 4.8