User manual

CRA-210 User Manual Guide
_______________________________________________________________________________
Page: 13 of 30
Status Page
Ping It is used to check the packet loss and latency time from your ATA to
check the quality of your network connection.
Traceroute It is used to determine the route taken by packets across an IP network.
Hardware Test It contains a suite of diagnostics that will test the hardware of your ATA
ATA Status
It provides detailed information about SIP Proxy Status, SIP Phone
Status, System Uptime, LAN & WAN configuration, Ethernet Status
and SIP Configuration (Phone).
Network Status This shows LAN, WAN and ADSL IP Address.
SIP Proxy
Status
This shows whether the unit is registered to VoIP service provider’s
server.
4.2.2. Login Information
CRA-210 has two level of management: Administrator Level and Normal User Level.
The factory default Login Information for User and administrator is mentioned below.
Administrator Level Normal User Level
User Name: admin
Password: admin
User Type: Admin
User Name: cem123
Password: cem123
User Type: Normal User
Administrator level has higher access privilege, and is allowed to create and change
password for all users. User Level has lower access privilege and certain options are
not available including SIP account settings.
The CRA-210 allows multiple users to log on at the same time i.e. both
Administrator & Normal User. After a user logs on, user will be automatically logged
off if there is no activity for 10 min.