Specifications

Step 5: The IP Phone will power up, and automatically connect itself to your network via DHCP (which
you can later configure in the SETTINGS > Network Settings section)
Important Note:
• Wait until the POWER and the touch screen display turns to normal on the Front Panel of your IP
Phone.
• Use Straight – through Ethernet cable to connect between the IP Phone to Router/Switch/PC
Step 6: Configure your IP Phone according to the instructions below
2.2 Accessing the GUI (Graphical User Interface)
Click the Settings Icon, navigate to System Info and Network status to view the WAN IP address of
the IP Phone. And then launch the web browser on the PC which is connected to the same network
to get GUI Login Screen.
On the login screen, the default username and password is “admin/admin”. Press the Login button to
enter the IP Phone web panel. To change the password, please refer to the SETTINGS > General
section in the navigation.
Important Note:
Recommended to use Mozilla Firefox or above version Web browser.
3. Setting up the Features
3.1 Home Screen
COPYRIGHT 2009-2011 ALLO.COM - VISIT US ONLINE AT WWW.ALLO.COM
6
This screen shows the status of SIP registrations for active SIP lines and call logs like missed,
answered and dialed calls.