Specifications

COPYRIGHT 2009-2011 ALLO.COM - VISIT US ONLINE AT WWW.ALLO.COM
21
5. Appendix A – Phone Setup
5.1 PoE Settings
Power over Ethernet or PoE technology describes a system to pass electrical power safely, along with
data, on Ethernet cabling. So far we have tested PoE with the following switches,
Sl.No Make Model Number
1 NetGear FS108P
2 D-Link DES-1008P
3 TP-Link TL-SF1008P
5.2 Attended Transfer
Attended transfer can be done via the touch display in the IP Phone. This type call transfer occurs,
when before making the transfer- a user first call to the third party to inform that a transferred call is
coming their way.
Follow the steps below to perform an attended or supervised call transfer:
1. With an active call in progress, press the ATD TRANSFER button in the display of IP Phone.
This puts the original caller on hold and gives you a ADD CALL TO TRANSFER button, click the
button it will give you dial tone. Dial the party that you wish to transfer to.
2. Inform the third party that they are about to receive a call
Once transferor hangs up the call, the original caller and the party you transferred to are now
connected
5.3 Blind Transfer
This type of call transfer occurs, when the person receives a call, and transfers the caller to another
person or call without any consultation or announcement from the transferor party.
Follow the steps below to perform a Blind or unattended call transfer:
1. With an active call in progress, press the BLIND TRANSFER button shown in the display of IP
Phone. This puts the original caller on hold and gives you a dial tone. Dial the party that you
wish to transfer to.
2. Once you transferred the call, the transferor call will get hang up
3. Only the original caller and the party you transferred to are now connected
5.4 3-way Conferencing
This is type of conference will allow only three parties. If anybody wants to create a conference, first
he has to initiate conference with following procedure.