Specifications

WAN Configuration
WAN Configuration is the Internet settings of your IP Phone.
1. DHCP: when enabled and a DHCP server is available, the IP Phone will auto configure itself.
If DHCP is not available, select the radio button for static IP “Using Static IP” and fill in the Network
Configuration
2. IP Address: the IP address corresponding to your network segment
3. Netmask: the Netmask corresponding to your network segment
4. Gateway: the IP address corresponding to your Gateway
5. DNS 1: the IP address corresponding to a DNS server
6. DNS 2: the IP address corresponding to a DNS server
HTTP Port
Specify the HTTP port to be accessed via the browser. It is highly recommended to change the port
when the IP Phone is configured in public network or behind NAT. Default port number is 80. Login
expire will expire the session and have to re-login again.
SNMP (Simple Network Management Protcol)
SNMP is a IP based network protocol for managing device. Default port number is 161
Syslog (Debugging)
COPYRIGHT 2009-2011 ALLO.COM - VISIT US ONLINE AT WWW.ALLO.COM
12
Syslog is where the system logs are stored by providing the syslog server’s IP address..