Datasheet

Errors, omissions and technical modi cations that guarantee the progress and further development of the products excepted.
www.allnet.de
Hardware Specifi cation of Banana ProTM
Banana M1+
SoC Allwinner® A20(sun 7i)
CPU ARM® Cortex™-A7 Dual-Core up to 1.2 GHz (ARM v7 instruction set)
GPU Mali400MP2, supporting OpenGL ES 2.0/1.1(hardware acceleration support)
RAM 1GB DDR3 SDRAM (shared with GPU)
PMU AXP209
Features
Storage MicroSD (TF) card slot
SATA 2.0(suggest 2.5 inch SSD or HDD)
Ethernet Port 10/100/1000Mbps ethernet (Realtek RTL8211E/D)
Wireless WiFi 802.11 b/g/n 2.4GHz
1 x IR receiver
USB 2 x USB2.0 Host
1 x USB 2.0 OTG (all direct from A20 chip)
Display Supports multi-channel HD display :
1 x HDMI 1.4 (Type A - full)
1 x LVDS/RGB/CPU display interface (DSI) for raw LCD panels
Composite video (PAL and NTSC) (via 3.5 mm TRRS jack shared with audio out)
HDMI resolutions from 640×480 to 1920×1080 plus various PAL and NTSC standards
Audio HDMI output
Analog audio (via 3.5 mm TRRS jack shared with composite video out)
I2S audio (also potentially for audio input)
1 x On board micphone for audio input
Camera 1 x Parallel 8-bit camera interface
Expansion Interface 40 Pins Header :
28×GPIO, some of which can be used for specifi c functions including UART, I2C, SPI,
PWM, CAN, I2S, SPDIF.
LED 1 x Power status led (red)
1 x User defi ned led1 (green)
1 x User defi ned led2 (blue)
Button 1 x Reset button
1 x Power button
1 x U-boot button
Power Source 5V @ 2A via MicroUSB
OS Support Android 4.2 / 4.4 / Linux
Appearance characteristic
Sizes 92mm x 60mm
Weight 45g