User manual

Page 26 Page 27
Functions
“Functions” offers you the opportunity to use in addition to the internal switching functions other external actors.
With the ALL4076 you can control the ALL3073, ALL3075, ALL3075V2 and Plugwise actuators. To use those
actuators appropriate, it is necessary to enable the various services. In addition, a time control can be set up.
Plugwise Service
Settings under „Functions“ > „Plugwise Service“
You need a complete Plugwise kit consisting of Plugwise Stick and Plugwise Circle and Circle +. Plugwise Circle
are pure actuators and they can only turn on or off a load. Plugwise Circle + are actuators with an additional
opportunity to display the current consumption. The communication between Plugwise stick and Plugwise Circle
is performed by the Zigbee wireless protocol. By activating the Plugwise service, Plugwise stick will connect to the
ALL4076. If the Plugwise stick will be removed, then also the Plugwise service can be disabled, otherwise the
system will permanently diplay error messages.
1. Plugwise UDP Port: Default = 54002 fixed parameters
2. Plugwise Serial Port: Default = /dev/ttyUSB0
3. Shows Watts in the panel: Default = enabled
Plugwise Actors
Settings under „Functions“ > „Plugwise Actors“
Settings Plugwise actuators
After clicking on the plus sign, a mask for the establishment of a new actuator will be automatically open.
1. Plugwise Actor: Enabled / Disabled
2. Actor name: Choose a suitable name fort he task. This name is displayed in the main page.
3. Actor description: the description contains the detailed information. It will not be displayed in the main
page.
4. Plugwise MAC Address: you will find it on the connector side of the Plugwise Circle actor. E.g.
000D60000768FC9. Please enter the full 16-digit number.
5. Choose an ICON: Choose a suitable icon.