User`s guide

Administrator password. When pressed and held for 3
seconds, the IP address, Administrator ID, and Administrator
Password settings will be set to their default values.
IP address: DHCP Client
Administrator ID: administrator
Administrator Password: null (no password)
Note:
After this procedure is completed, the Power LED will blink three
times to confirm that the reset was completed successfully.
Package Contents
The following items should be included: If any of these items are damaged or missing, please
contact your dealer immediately.
1. Network Camera
2. Camera Mount
3. Antenna (ALL2250 and ALL2211 only)
4. Power adapter
5. Installation CD-ROM
6. Quick Installation Guide
7. Ethernet Cable
5