User`s guide

Main Screen
You can view live video in the main screen. The built-in software can let you view up to 9
cameras on a single computer screen at one central location.
The Icons allow you to control the cameras and video streams.
Speaker Volume - For Cameras that feature audio, click this bar and move its
endpoint to raise or lower the volume.
Sound On/Off. One of these icons will be displayed.
This can be used to select the Audio stream which can be heard. (Only one audio
stream can be selected at any time.) If the camera does not support audio, or if
audio is disabled on the camera, this option is unavailable.
Channel Indicator. This indicates the current channel (camera).
Play. Use this to re-start viewing, after using the Stop or Pause button.
Pause. Use this to temporarily stop the connection to the camera
Stop. This will terminate the connection to the camera, halting both the viewing
and the recording (if in progress).
Record. Click this to start recording the current video stream.
While recording, this button will be blue. To stop recording, click the Stop
button.
Snapshot. Click this to take a single JPEG "snapshot" image of the current
video.
Zoom Camera. A digital zoom feature is available. To zoom in on a section of
the window, click this icon. Then use your mouse to select the section you want
to magnify. Click the icon again to disable the zoom feature.
Flip Video. Click this to have the image swapped top-to-bottom.
Mirror Video. Click this to have the image swapped left-to-right.
Direct Pan/Tilt. For ALL2250, use this to move the camera to the Pan/Tilt
position directly.
Preset Position. For ALL2250, select the desired Preset position.
Refresh. For ALL2250, update the Preset position list. This has no effect unless
during the viewing session, another user or the Camera Administrator has
renamed one or more of the Preset positions.
Create Preset Points. For ALL2250, define (or re-define) a Preset position. The
Camera Administrator can choose whether or not this option is available.
Patrol. For ALL2250, move through the Preset positions in the sequence
defined by the Camera Administrator.
Auto Pan. For ALL2250, click this to have the camera moved from left to right
automatically.
63