User`s guide
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Basic Setup
- Chapter 3 Viewing Live Video
- Chapter 4 Advanced Viewing Setup
- Chapter 5 Web-based Management
- Introduction
- Connecting to Network Camera
- Welcome Screen
- Administration Menu
- System Screen
- Network Screen
- Wireless Screen (ALL2250 and ALL2211 only)
- DDNS Screen
- Video Image Screen
- Video Access Screen
- User Database Screen
- Pan/Tilt Screen (ALL2250 only)
- Motion Detection Screen
- E-Mail Alerts Screen
- Maintenance Screen
- Status Screen
- Log Screen
- Chapter 6 Windows Viewing/Recording Utility
- Chapter 7 Troubleshooting
- Appendix A Specifications
- Appendix B Streaming Video/Audio Solution
6
Chapter 6
Windows Viewing/Recording
Utility
This Chapter describes how to view and record the live video stream
generated by the Network Camera, using the supplied Windows utility.
Overview
The recommended method to view video is to use the supplied Windows Viewing/Recording
utility. This utility also allows you to record the video streams, either interactively or using a
schedule.
Installation
1. Insert the supplied CD-ROM into your drive. If the setup program does not start
automatically, run Setup.exe in the root folder. You will see the Welcome screen shown
below.
Figure 41: Welcome Screen
2. Click the Install Utility button to start the installation of the Viewing/Recording Utility.
3. Follow the prompts to complete the installation.
57