User`s guide

Quality Control
Select the desired option:
• Fix BIT Rate: Select the desired fix bit rate. The default bit
rate is set to 1.2 Mbps.
• Fix Quality: Select the desired fix quality. The default fix
quality is set to Normal.
Note: Higher image quality requires more bandwidth.
Desired Frame
Rate
Select the desired frame rate for the camera. Reducing this will
lower the amount of bandwidth required by the camera.
Power line
frequency
Select the power line frequency (50Hz or 60Hz) used in your region,
to improve the picture quality under florescent lighting.
Adjustment
Color Balance
Select the desired option to match the current environment and
lighting.
Exposure
If necessary, you can adjust the exposure to obtain a better image.
For example, if the camera is facing a bright light, the image may be
too dark. In this case, you can increase the exposure.
Sharpness
Select the desired option for the sharpness. You can select a
Sharpness value between -3 and 3.
Options
Microphone
Enable audio by checking this checkbox. Using Audio will increase
the bandwidth requirements slightly.
Flip
The Flip setting will swap the image top-to-bottom.
If the camera is mounted upside-down on the ceiling, check both the
Flip and Mirror settings to have the image rotated to the correct
position.
Mirror
The Mirror setting will swap the image left-to-right.
If the camera is mounted upside-down on the ceiling, check both the
Flip and Mirror settings to have the image rotated to the correct
position.
Time Stamp
If enabled, the current time will be displayed on the Video image.
Text Overlay
Enable this setting if you want text to be displayed on the Video
image, and enter the desired text - up to 20 characters. This feature
is often used to identify each camera when multiple cameras are
installed.
42