User`s guide
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Basic Setup
- Chapter 3 Viewing Live Video
- Chapter 4 Advanced Viewing Setup
- Chapter 5 Web-based Management
- Introduction
- Connecting to Network Camera
- Welcome Screen
- Administration Menu
- System Screen
- Network Screen
- Wireless Screen (ALL2250 and ALL2211 only)
- DDNS Screen
- Video Image Screen
- Video Access Screen
- User Database Screen
- Pan/Tilt Screen (ALL2250 only)
- Motion Detection Screen
- E-Mail Alerts Screen
- Maintenance Screen
- Status Screen
- Log Screen
- Chapter 6 Windows Viewing/Recording Utility
- Chapter 7 Troubleshooting
- Appendix A Specifications
- Appendix B Streaming Video/Audio Solution
• Channel - For Ad-hoc mode, select the channel used by your other Wireless devices.
(For Infrastructure mode, the Access Point determines the channel used.)
7. Click Next to continue to the Security screen, shown below, choose Disabled, WEP or
WPA-PSK. (WPA-PSK is not available for Ad-hoc Wireless Networks.)
Figure 8: Security Screen
8. If you chose WEP(64 or128), the following screen is shown below.
Figure 9: WEP Key Settings
• Authentication - Select the option used on your Wireless LAN.
• Keys - If using WEP, the default key must match the key used on your other Wireless
stations. The other keys are optional.
You can enter the key value directly, or generate a key by entering a string into the
Passphrase field, and clicking the Generate button.
11