Operation Manual

ALLNET ALL0237R User Manual
Page 18 of 27
d. Click on the Browse button and locate and open the firmware for ALL0237R
and click Apply to start the update.
Note: It is recommended to only use firmware which is officially release by ALLNET, Using third
party firmware will void the warranty of the device.
System Password
Set a password on web user interface to prevent other users from getting access to
the web UI and avoid unwanted changes from your settings.
System Password
Type your password and click on apply to activate this feature. To disable, simply
remove the password and click apply to save your settings.
Note: forgotten password will not be recovered. Reset the device pressing the reset button found
beside the Ethernet port of ALL0237R.