Instructions

SG-ALLISON-2021-03-100421

Allison Offline Authentication USB Dongle

Setup Guide

The purpose of the Allison Offline Authentication USB Dongle is to allow Allison DOC® and

TCM Reflash to authenticate with the 6th Gen TCM when an active internet connection is not

available (offline) or has a low grade/poor quality connection. The Allison Offline

Authentication USB Dongle is not required when online and logged into Allison DOC® with an

Allison HUB user ID or Allison TCM Reflash user ID.

Note: Allison OEM VCP users should refer to the VCP User Guide for information. The VCP User

Guide is located on Allison HUB under the Engineering > VEPS Tools menu.

While the Allison Offline Authentication USB Dongle is intended for offline use, an active

internet connection and an Allison HUB account or TCM Reflash account are required to

activate and provision the dongle for the first time. To request an Allison HUB account visit

https://hub.allisontransmission.com/.

NOTE: Due to the small size of the USB, it is recommended to attach the USB dongle to a lanyard.

PAGE 1
Allison Offline Authentication USB Dongle Setup Guide The purpose of the Allison Offline Authentication USB Dongle is to allow Allison DOC® and TCM Reflash to authenticate with the 6th Gen TCM when an active internet connection is not available (offline) or has a low grade/poor quality connection. The Allison Offline Authentication USB Dongle is not required when online and logged into Allison DOC® with an Allison HUB user ID or Allison TCM Reflash user ID.
PAGE 2
To use your new USB dongle for the first time: 1. Insert USB dongle to PC’s USB port and ensure the white LED illuminates. If it does not, remove and reinsert the USB dongle. 2 4 a. Open Allison DOC® or TCM Reflash 3 i. From Allison DOC®, go to the “Help” menu and select “Allison Security (6th Gen)”, then select the “Advanced” button. 5 ii. From TCM Reflash, select the 6th Gen Database and then select the link in the lower corner. 2. Click the “New USB” tab. 3.