Specifications

GS660 Technical Manual Page 6
Specifications
Sensor Type Sony ICX618ALA CCD (ICX618AQA for color)
Sensor Shutter Type Progressive Interline
Image Resolution 659 x 494 pixels
Pixel Size 5.6μm x 5.6μm
Optical Forma
t
1
/
4 inch
Lens Moun
t
C-mount with adjustable back focus (CS-mount available)
Color Sensor Filter Pattern
†
Bayer
Full Resolution Frame Rate 119 fps
Frame Rate (320 x 240 ROI) 199 fps
I/O 1 isolated inpu
t
/
outpu
t
, 1 non-isolated input/output,
1 RS-232 input/output
Power Requirements
Less than 3.0W
††
(5V to 16V)
†††
A/D 14 bi
t
Outpu
t
12 bi
t
Trigger latency* 2us for non-isolated I/O, 10us for isolated I/O
Trigger Jitter* ±20ns for non-isolated I/O, ±0.5us for isola
t
ed I/O
Tpd* 10ns for non-isolated I/O, 1.3us for isolated I/O
Operating Temperature 0 to 50 Celsius***
Operating Humidity 20 to 80% non-condensing
Weigh
t
184g
Hardware Interface Standard IEEE 802.3 1000BASE-T, 100BASE-TX
Software Interface Standard GigE Vision Standard 1.0
Regulator
y
CE, FCC, RoHS
† Applies to GS660C only.
†† Power consumption will increase with reduced ROI imaging and color interpolation.
††† Nominal operating voltage is 12V. Cameras have been tested at 12V.
* See Notes on Triggering in the Addendum.
***DUE TO THE SMALL PACKAGING AND HIGH SPEED OF THE GS CAMERAS, SPECIAL CARE IS REQUIRED TO
MAINTAIN A REASONABLE OPERATING TEMPERATURE. IF THE CAMERA IS TO BE OPERATED IN A WARM
ENVIRONMENT, IT IS SUGGESTED THAT THE CAMERA BE MOUNTED ON A HEAT SINK SUCH AS A METAL BRACKET
AND THAT THERE IS SUFFICIENT AIR FLOW.