Specifications

GC655Technical Manual Page 2
Specifications
Sensor Type Sony ICX414AL CCD (ICX414AQ for color)
Sensor Shutter Type Progressive Interline
Image Resolution 659 x 493 pixels
Pixel Size 9.9μm x 9.9μm
Optical Forma
t
1/2 inch
Lens Moun
t
C-mount with adjustable back focus
Color Sensor Filter Pattern
†
Bayer
Full Resolution Frame Rate 90 fps
Frame Rate (320 x 240 ROI) 164 fps
I/O 1 isolated input/output, 1 non-isolated input/output,
1 RS-232 input/output
Power Requirements Less than 3.0W
††
(5V to 16V)
†††
Digitization 12 Bits
Trigger latency* 1.0us for non-isolated I/O, 2.8us for isolated I/O
Trigger Jitter* ±20ns for non-isolated I/O, ±0.5us for isolated I/O
Tpd* 10ns for non-isola
t
ed I/O, 1.3us for isolated I/O
Operating Temperature 0 to 50 Celsius***
Operating Humidity 20 to 80% non-condensing
Size 33mm (height) x 46mm (width) x 59mm (length)
Weigh
t
100g
Hardware Interface Standard IEEE 802.3 1000BASE-T, 100BASE-TX
Software Interface Standard GigE Vision Standard 1.0
Regulator
y
CE, FCC, RoHS
† Applies to GC655C only.
†† Power consumption will increase with reduced ROI imaging and color interpolation.
††† Nominal operating voltage is 12V. Cameras have been tested at 12V.
* See Notes on Triggering in the Addendum.
***DUE TO THE SMALL PACKAGING AND HIGH SPEED OF THE GC CAMERAS, SPECIAL CARE IS REQUIRED TO
MAINTAIN A REASONABLE OPERATING TEMPERATURE. IF THE CAMERA IS TO BE OPERATED IN A WARM
ENVIRONMENT, IT IS SUGGESTED THAT THE CAMERA BE MOUNTED ON A HEAT SINK SUCH AS A METAL BRACKET
AND THAT THERE IS SUFFICIENT AIR FLOW.