Specifications

Start up
Pearleye Technical Manual V2.0.0
21
but no hardware handshake. Thus a sequence of commands should not be send
to the camera without awaiting the intermediate input prompts. Otherwise the
camera’s serial input buffer may overflow.
Adjust the image processing
Subsequently the important commands for quick starting the image correction
of the Pearleye P-007 LWIR / Pearleye P-030 LWIR are mentioned. All further
parameters and a description of the correction modules can be found in Chapter
Image processing on page 31.
The camera is configured ex-factory with parameter settings which ensure a
basic image correction. In the case that the Pearleye P-007 LWIR /
Pearleye P-030 LWIR is equipped with multiple correction data sets for differ-
ent operation conditions, the image quality can be improved by activating
another correction data set if the conditions of the camera have changed. In
addition the Pearleye P-007 LWIR / Pearleye P-030 LWIR models feature an
electromechanical shutter that can further enhance the quality of the corrected
image. The selection of a good data set can be done automatically by use of the
serial command k=0. This command also controls the shutter.
Note

For more information: see Chapter Automatic calibration (k) on
page 37.