Specifications

Specifications
Pearleye Technical Manual V2.0.0
14
Pearleye P-030 LWIR
Note

• The right polarization of the 12 V supply voltage must be
assured.
• The warranty becomes void in case of unauthorized tam-
pering or any manipulations not approved by the manu-
facturer.
Feature Specification
Image device Amorphous silicon uncooled microbolometer focal plane array (FPA)
ULIS UL 03 08 1; built-in electromechanical shutter
Effective chip size 16 mm (H) x 12 mm (V)
Cell size 25 μm x 25 μm
Image size (max.) 640 (H) x 480 (V)
Lens mount M65 x 0.5
Field of view (FOV) With 18 mm lens: 47.9° x 36.9°
Focus range 0.5 m to infinity (manually adjustable)
Spectral response 8 ... 14 μm (LWIR)
Pixel format Mono8, Mono10, Mono12, Mono14
Frame rate up to 24 fps
Measurement temperature
range
-20 °C ... +80 °C (standard version)
Sensitivity (NETD) typical 120 mK @ 303 K @ f/1.0
Temperature stabilization Peltier stabilized
ADC 14 bit
Digital output 14 bit, GigE
Sensor time constant approx. 7 ms
Smart features Built-in correction data sets, bad pixel correction, background (FPN)
correction, gain/offset correction (NUC/non-uniformity correction) for
each pixel, drift compensation, temperature linearization (LUT),
continuous mode (image acquisition with maximum frame rate)
With AVT‘s AcquireControl: pseudo color LUT with several color profiles,
auto contrast, auto brightness, temperature measurement, analyze
multiple regions (rectangular, circle) within image, real-time statistics
and histogram, background (FPN) correction
Digital interface IEEE 802.3 1000BASE-T (GigE Vision V1.2)
Table 4: Specification Pearleye P-030 LWIR