Operator and Parts Manual Hydraulic Snowblower Model 6025, 7225, 7235, 8425, & 8435 012013 FK378
Table of Contents - Hydraulic Snowblower Table of Contents Introduction..................................................................................................................................4 Safety.............................................................................................................................................5 • Safety.................................................................................................................................5 • General Safety....
Introduction - Hydraulic Snowblower Introduction For more than a generation, Allied has been building the most popular snowblowers used on farms, airports, and municipalities throughout the North American snow-belt. Now, all that experience brings you the rugged hydraulic snowblowers to handle more demanding snow clearing jobs. The Allied Hydraulic Snowblower is offered in three main sizes: 60", 72" and 84".
Safety - Hydraulic Snowblower Safety Safety Instructions Remember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenance procedures and follows all the safety precautions. Most accidents can be prevented. Do not risk injury or death by ignoring good safety practices.
Safety - Hydraulic Snowblower General Safety Instructions • • • • • • • • • Have a first-aid kit available for use and know how to use it. Have a fire extinguisher available, stored in a highly visible location, and know how to use it. Wear appropriate protective gear.
Safety - Hydraulic Snowblower Transport Safety • • • • • Review Transport Safety instructions in tractor manual before moving. Check with local authorities regarding transport on public roads. Obey all applicable laws and regulations. Make sure the SMV (Slow Moving Vehicle) emblem and all the lights and reflectors that are required by the local highway and transport authorities are in place, are clean, and can be seen clearly by all overtaking and oncoming traffic.
Safety - Hydraulic Snowblower Safety Signs • • • The following illustration shows the approximate location and detail of safety signs. Keep all safety signs clean and legible and replace any that are damaged or missing. When original parts are replaced, any safety signs affixed to those parts should be replaced as well. Replacement safety signs are available from your local dealer using part number shown in the corner of the sign.
Safety - Hydraulic Snowblower 1 2 3 102893 9
Assembly - Hydraulic Snowblower Assembly Instructions 1. Unpack all components and remove from shipping material. Verify quantities provided with parts listing. NOTE: Depending on your shipping/assembly configuration, steps 2-3 may already be completed. 2. Begin with spout to snowblower assembly: -- Place UHMV spout ring (815503) on top of spout base plate of snowblower fan housing.
Assembly - Hydraulic Snowblower 4. Universal Wiring Harness Installation (Optional): A three piece universal wiring harness (816225) is provided to allow for quick and easy disconnects and hookups. The snowblower segment is to be left permanently installed to snowblower and has a coupling that can be connected/disconnected conveniently with main hydraulics. The cab harness segment is also easily detachable so the spout control unit can be removed from the skid steer cab when not needed.
Start-up and Operation - Hydraulic Snowblower Start-up and Operation Instructions The hydraulic system of the snowblower is configured so that the fan motor is prevented from stalling in a snow overload condition. A significant increase in fan loading increases the hydraulic pressure drop across the fan motor, which in turn diverts flow away from the auger motor, thereby reducing/stopping further fan loading and simultaneously providing more power to clear the fan.
Start-up and Operation - Hydraulic Snowblower Theory of Operation Fan Blade Rotation Rotate Spout Left or Right Uncleared Snow Cleared Snow 13
Specifications - Hydraulic Snowblower Specifications Model 6025 7225 7235 8425 8435 Width, overall 62" (1575 mm) 74" (1880 mm) 74" (1880 mm) 86" (2184 mm) 86" (2184 mm) Height, overall 62" (1575 mm) 62" (1575 mm) 67" (1702 mm) 62" (1575 mm) 67" (1702 mm) Depth 36" (914 mm) 36" (914 mm) 36" (914 mm) 36" (914 mm) 36" (914 mm) Height, intake 25" (635 mm) 25" (635 mm) 35" (889 mm) 25" (635 mm) 35" (889 mm) Width, intake 60" (1524 mm) 72" (1829 mm) 72" (1829 mm) 84" (2134 mm)
Specifications - Hydraulic Snowblower Model 6025 7225 7235 8425 8435 23 GPM (88 LPM) 23 GPM (88 LPM) 40 GPM (153 LPM) 23 GPM (88 LPM) 40 GPM (153 LPM) Side Plate Thickness .25" (6 mm) .25" (6 mm) .25" (6 mm) .25" (6 mm) .25" (6 mm) Main Body Thickness .179" (5 mm) .179" (5 mm) .179" (5 mm) .179" (5 mm) .
Bolt Torque - Hydraulic Snowblower Bolt Torque Checking Bolt Torque The tables shown below give correct torque values for various bolts and hex bolts. Tighten all bolts to the torques specified in chart unless otherwise noted. Check tightness of bolts periodically, using bolt torque chart as a guide. Replace hardware with the same strength bolt. Bolt Torque* Bolt Diameter Grade 2 Bolts Grade 5 Bolts Grade 8 Bolts (inches) SAE 2 SAE 5 SAE 8 “A” (lb-ft) (N.m) (lb-ft) (N.m) (lb-ft) (N.m) 0.
Troubleshooting - Hydraulic Snowblower Troubleshooting Symptom Probable Cause Remedy Nothing works • Hydraulic valve not engaged • Engage to full detent • One or more quick couplers • Fully engage all couplers not completely engaged • Incorrect flow direction • Switch flow direction using controls or swapping hose ends • Defective quick coupler • Replace defective quick couplers • Hydraulic pump low on fluid • Top up fluid level Fan turns too slow • Inadequate hydraulic flow for snowblower • Check t
2 4 8 8 13 2 37 39 50 5 37 39 40 1 7 22 21 1 22 1 55 1 9 4 10 4 47 4 42 2 17 1 30 10 37 39 7 22 24 1 8 8 51 4 39 1 39 1 39 1 39 1 19 1 15 2 14 2 Parts - Hydraulic Snowblower Hydraulic Snowblower - All Models
Parts - Hydraulic Snowblower 53 2 1 1 18 1 6 6 3 4 33 4 2 4 16 1 37 39 45 14 37 39 7 22 37 39 4 4 42 1 37 39 61 5 38 1 50 5 32 2 43 2 49 2 31 2 23 4 23 4 5 2 28 1 29 1 46 7 34 5 52 1 7 22 34 5 6 6 58 2 6 6 12 2 37 39 41 1 46 7 61 5 25 8 8 27 1 35 8 26 1 46 7 54 1 37 39 56 2 14 2 11 6 59 2 58 2 20 2 44 6 45 14 45 14 48 6 60 2 59 2 60 2 USED ON SF MODELS ONLY USED ON HF MODELS ONLY 19
Parts - Hydraulic Snowblower When Ordering Parts Always give your dealer the Model, Color and Serial Number of your machine to assist them in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part. Item Part Number 1 24930M Cyl 1.75 Dia x 5.0 9/16 Orb 1 2 811791 Bolt Hex 0.500Nc x 2.0 Gr5 (Pl) 4 3 811795 Bolt Hex 0.375Nc x 2.00 Gr5 (Pl) 4 4 812259 Bolt Hex 0.375Nc x 5.
Parts - Hydraulic Snowblower Item Part Number Description Qty 26 815497 19T 1/2" Pitch Spout Rotation Sprocket 1 27 815498 Hydraulic Manifold - Shield 1 28 815499 Spout Rotation Motor - Shield 1 29 815503 UHMW Spout Ring 1 30 815505 Flat Head Socket Cap 3/8-16 x 1.
Parts - Hydraulic Snowblower Hose Assembly - Model 60" SF Part Number Description 816191 Hose 3/8 x 66 9/16 Fjic x 9/16 F90 816206 Hose 3/4 x 23.8 1-16 Fjic Jic 45 816207 Hose 3/4 x 27.3 1-1/16 Fjic x 45 816208 Hose 5/8 x 25 7/8 Fjic x 7/8 Jic 45 816209 Hose 3/8 x 23-9/16 Fjic x Jic 45 816212 Hose 3/8 x 39 9/16 Fjic 90 816452 Hyd SB Main Return Hose 816189 1/2" Body, Male FF Coupler 816453 Hose 3/4 x 91.
Parts - Hydraulic Snowblower Hose Assembly - Model 72" SF Part Number Description 816191 Hose 3/8 x 66 9/16 Fjic x 9/16 F90 816206 Hose 3/4 x 23.8 1-16 Fjic Jic 45 816207 Hose 3/4 x 27.3 1-1/16 Fjic x 45 816209 Hose 3/8 x 23 9/16 Fjic x Jic 45 816211 Hose 5/8 x 29.5 7/8 Swfjic 45 816212 Hose 3/8 x 39-9/16 Fjic 90 816452 Hyd SB Main Return Hose 816189 1/2" Body, Male FF Coupler 816453 Hose 3/4 x 91.
Parts - Hydraulic Snowblower Hose Assembly - Model 72" HF Part Number Description 816059 Hose 3/8 x 43.4 9/16 Fjic 45 816060 Hose 5/8 x 32 7/8 Fjic x 7/8 Jic 45 816061 Hose 3/8 x 27.7 9/16 Fjic x Jic 45 816191 Hose 3/8 x 66 9/16 Fjic x 9/16 F90 816214 Hyd SB Main Return Hose 816189 1/2" Body, Male FF Coupler 816210 Hose 3/4 x 87 1-1/16 Morb x Jic 45 816215 Hose 3/4 x 30.5 1-1/16 Morb x Jic 45 816216 Hose 3/4 x 31.
Parts - Hydraulic Snowblower Hose Assembly - Model 84" SF Part Number Description 816191 Hose 3/8 x 66 9/16 Fjic x 9/16 F90 816206 Hose 3/4 x 23.8 1-16 Fjic Jic 45 816207 Hose 3/4 x 27.3 1-1/16 Fjic x 45 816209 Hose 3/8 x 23 9/16 Fjic x Jic 45 816212 Hose 3/8 x 39 9/16 Fjic 90 816213 Hose 5/8 x 33.5 7/8 Swfjic 45 816452 Hyd SB Main Return Hose 816189 1/2" Body, Male FF Coupler 816453 Hose 3/4 x 91.
Parts - Hydraulic Snowblower Hose Assembly - Model 84" HF Part Number Description 816059 Hose 3/8 x 43.4 9/16 Fjic 45 816061 Hose 3/8 x 27.7 9/16 Fjic x Jic 45 816191 Hose 3/8 x 66 9/16 Fjic x 9/16 F90 816214 Hyd SB Main Return Hose 816189 1/2" Body, Male FF Coupler 816210 Hose 3/4 x 87 1-1/16 Morb x Jic 45 816215 Hose 3/4 x 30.5 1-1/16 Morb x Jic 45 816216 Hose 3/4 x 31.
Parts - Hydraulic Snowblower Manifold 28
Parts - Hydraulic Snowblower Item 1 2 3 4 5 6 7 8 9 Part Number Description 816420 Plug - Right X3929 Seal Kit 816421 Relief Valve - High Flow 816534 Relief Valve - Standard Flow X3930 Seal Kit 816422 Plug - Top Right X3930 Seal Kit 816423 Plug - Left Front X3932 Seal Kit 816424 Plug - Left Rear X3933 Seal Kit 816425 Plug - Front X3932 Seal Kit 816426 Plug - Top Left X3935 Seal Kit 816427 Solenoid X3934 Seal Kit 816428 Coil 816429 Coil Nut 816430 Plug - Top Front
Shipping Kit and Bundle Numbers - Hydraulic Snowblower Shipping Kit and Bundle Numbers Bundle Number Description Qty 60" Standard Flow - Hydraulic Snowblower (HSB6025SF) F1534 Full Assembly w/ Hoses 1 72" Standard Flow - Hydraulic Snowblower (HSB7225SF) F1535 Full Assembly w/ Hoses 1 84" Standard Flow - Hydraulic Snowblower (HSB8425SF) F1537 Full Assembly w/ Hoses 1 72" High Flow - Hydraulic Snowblower (HSB7235HF) F1536 Full Assembly w/ Hoses 1 84" High Flow - Hydraulic Snowblower (HSB8435HF)
Hole Locations for Width Extendor Kits - Hydraulic Snowblower Hole Locations for Width Extendor Kits STANDARD FLOW WIDTH HIGH FLOW WIDTH CENTER OF HOLE IS FLUSH WITH SURFACE 3.64 6.25 6.25 0.53 5X 6.25 6.25 0.53 4X 6.25 6.25 6.25 1.75 4X 1.75 5X 1 1 2 1 2 1 3 1 Item Part Number 1 84277 Bolt Hex 0.500 Nc x 1.50 Gr5 (Pl) Description 2 84048 Washer 0.500 Flat SAE Bs (Pl) 3 81966 Nut Lock (Nylon) 0.
816224 816220 QUICK DISCONNECT AT HYDRAULIC ENDS SNOWBLOWER MANIFOLD HOOKUPS (SEE PHOTO 9 FOR PROPER CONNECTING) 816221 IN CAB DISCONNECT REMOTE CONTROL BOX POSITIVE BATTERY RING TERMINAL INLINE FUSE HOLDER NEGATIVE BATTERY RING TERMINAL + - Maintenance - Hydraulic Snowblower Maintenance Hydraulic Snowblower Wiring Schematic 816225
Maintenance - Hydraulic Snowblower Part Number Description 816049 Electric Switch Housing - Base 816050 Electric Switch Housing - Top 816220 Hyd SB Harness, Cab 816221 Hyd SB Harness, Battery 816222 Hyd SB Harness, Valve 816223 Eaton Switch - Left & Right 816224 Eaton Switch - Up & Down 816226 3-3/16" Steel Encased Magnet 33
Pictorial References - Hydraulic Snowblower Pictorial References Harness secured to hydraulic hose 1 2 Manifold Hookups Harness Top view of snowblower connections Harness routed with existing hydraulic lines on lift arm Coupler 3 4 Main harness routing Main harness routing 5 34 Main harness routing
Pictorial References - Hydraulic Snowblower Main harness routing (cab lifted) Negative Positive Extra length coiled 7 Main Harness power connections Coupler located behind operator station 6 Harness follows existing cab harness Coupler from main harness Extra length coiled 8 9 In-cab harness routing Control Box In-cab harness routing 10 Chute hydraulic hook-ups 35
Warranty - Hydraulic Snowblower Allied by Farm King Limited Warranty This document limits your warranty rights. Base Limited Warranty Buhler Industries Inc. provides this warranty only to original retail purchasers of its product. Buhler Industries Inc. warrants to such purchasers that all Buhler Industries Inc.
Warranty - Hydraulic Snowblower Authorized Dealer and Labor Costs Repairs eligible for labor under this limited warranty must be made by Buhler Industries Inc. or an authorized Farm King dealer. Buhler Industries Inc. retains the exclusive discretion to determine whether it will pay labor costs for warranty repairs or replacements, and the amount of such costs that it will pay and the time in which the repairs will be made. If Buhler Industries Inc.
Warranty - Hydraulic Snowblower (Note that some provinces or states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusion may not apply to you.) This warranty gives you specific legal rights and you may also have other rights, which vary from province to province or state to state. Buhler Industries Inc.
www.farm-king.com 1330 43rd Street NW Fargo, ND USA 58102 Ph.: 701.282.7014 | Fax: 701.282.5865 Toll Free: 888.524.1004 E-mail: info@buhler.com www.farm-king.com Equipment shown is subject to change without notice. ©2013 Buhler Trading Inc. Printed in USA. TSX:BUI a division of Buhler Industries Inc.
