Specifications

C613-10506-01-REV A Software Release Note AlliedWare Plus Version 5.4.2-0.1 3
Hardware Support
This version provides the following new hardware support.
For more information on the x610 Series Layer 3+ switches, including Expansion modules,
Cables, SFP+ modules and power supply accessories, see the x610 Data Sheet and Hardware
Reference. For more information about the Allied Telesis XEMs, refer to the High Speed
Expansion Modules, XEM data sheet.
Support for x610 Series Switches
The Allied Telesis x610 family of switches provide a high performing and scalable solution for
today’s networks, providing an extensive range of port density and uplink-connectivity options.
The x610 family builds on the existing x600 family of products adding increased switching
capacity and PoE+. With a choice of 24-port and 48-port versions and optional 10 Gigabit
uplinks, plus the ability to stack up to eight units with the StackXG expansion module, the x610
family can connect anything from a small workgroup to a large business.
AT-x6EM/XS2 Expansion Module for Long Distance Stacking on x610 Series
The AT-x6EM/XS2 expansion module for the x610 Series supports stacking over long distances
using standard fibre connections (“VCStack Long Distance Stacking for x610 Series” on
page 5). The AT-x6EM/XS2 features 2 x 10 GbE SFP+ ports, which allow for long or short haul
connections between each stack member, depending on the distance the inserted SFP+
transceiver supports. The stacking links provided by the AT-x6EM/XS2 operate at 10 Gbps.
Network Operation of Stacking XEM ports
By default, the two ports in the AT-x6EM/XS2 and AT-StackXG stacking modules are used for
stacking. Now, when stacking is disabled, these modules provide an extra two 10 GbE network
ports. For more information on the x610 Family of Layer 3+ switches, including Expansion
modules, Cables, SFP+ modules and power supply accessories, see the x610 Data Sheet and
Hardware Reference.
XEM-2XS Expansion Module for x900 and SBx908
The XEM-2XS features 2 x 10GbE SFP+ ports. Allied Telesis XEMs offer a high degree of
flexibility that future-proofs your network investment against changes in network infrastructure,
topologies, and physical link requirements.
Achieve high performance with the XEM-2XS 10 Gigabit Ethernet capable XEM. With true ten
Gigabits per second throughput for each of the two 10 GbE ports, this XEM provides high-
speed, high-capacity copper or fibre uplinks, with up to 20 Gbps of non-blocking throughput
per XEM-2XS.
Table 2: x610 switch models and port specifications
Product
10/100/1000
Copper Ports
100/100x
SFP Ports
1000X SFP
Combo Ports
10Gigabit
SFP+ Ports
Max PoE+
Ports
AT-x610-24Ts 24 – 4 –
2
*
–
AT-x610-24Ts-PoE+ 24 – 4 –
2
*
24
AT-x610-24Ts/X 24 – 4 2
4
*
–
AT-x610-24Ts/X-PoE+ 24 – 4 2 4* 24
AT-x610-48Ts 48 – 4 – 2* –
AT-x610-48Ts-PoE+ 48 – 4 – 2* 48
AT-x610-48Ts/X 48 – 2 2 4* –
AT-x610-48Ts/X-PoE+ 48 – 2 2 4* 48
* with AT-x6EM/XS2 module in standalone switch