Specifications

20 Software Release Note AlliedWare Plus Version 5.4.2-0.1 C613-10506-01-REV A
show debugging ipv6 ospf
show ipv6 ospf
show ipv6 ospf database
show ipv6 ospf database
external
show ipv6 ospf database
network
show ipv6 ospf database
router
show ipv6 ospf interface
show ipv6 ospf neighbor
show ipv6 ospf route
Modified YYYYOSPFv3 for IPv6
Commands
These commands are now available
from the User Exec command mode
prompt (awplus>) and the Privileged
Exec command mode prompt
(awplus#).
debug bgp
undebug bgp
Modified Y Y Y Y BGP Commands Use these commands to turn on or of
one or more BGP debug options.
These commands now have the option
to debug for BGP NHT (Next Hop
Tracking). You can also now issue this
command from Privileged Exec and
Global Configuration command modes
at the awplus# and awplus(config)#
prompts respectively.
show bgp nexthop-tracking
show bgp nexthop-tree-
details
show debugging bgp
show ip bgp
show ip bgp attribute-info
show ip bgp cidr-only
show ip bgp community
show ip bgp community-
info
show ip bgp community-list
show ip bgp dampening
show ip bgp filter-list
Modified Y Y Y Y BGP Commands These commands are now available
from the User Exec command mode
prompt (awplus>) and the Privileged
Exec command mode prompt
(awplus#).
Table 4: New and modified commands in 5.4.2-0.1
Command Status
x600 x610 x900
SBx908
Software
Reference
Chapter
Description