Instruction manual

Specifications
4.9 F-131B
Specification
Image device 2/3 " (diag. 11 mm) Type global shutter CMOS sensor
Effective Picture Elements 1280 (H) x 1024 (V)
Lens Mount
C-mount: 17.526 mm (in air); ∅ 25.4 mm (32 T.P.I.)
Mechanical Flange Back to filter distance: 8.2 mm
Picture Sizes Up to 1280 x 960 pixels (Format_2), supporting all smaller fixed
formats; 1280 x 1024 pixels (Format_7 Mode_0);
640 x 1024 pixels (Format_7 Mode_1, sub-sampling)
1280 x 512 pixels (Format_7 Mode_2, sub-sampling)
640 x 512 pixels (Format_7 Mode_3, sub-sampling)
Cell Size 6.7 µm x 6.7 µm
ADC 10 Bit
Data Path 8 Bit
Frame rates 3.75 Hz; 7,5 Hz; 15 Hz; up to 25 Hz in Format_7; 30 Hz @ SVGA and
smaller
Gain Control Manual: 0– 16 dB (13 x 1.25 dB)
Shutter Speed 20 µs- 67s; Auto shutter (select. AOI)
External Trigger Shutter Trigger_Mode_0, Trigger_Mode_1, Advanced feature:
Trigger_Mode_15 (bulk); image transfer by command; Trigger delay
Internal FIFO-Memory Up to 4 frames
# Look Up Tables One, user programmable (10 Bit -> 8 Bit); separate Gamma (0.45)
LUT
Smart Functions Dark signal non uniformity (DSNU) correction, Real time shading
correction; two configurable inputs, two configurable outputs, high
dynamic range (HDR) mode, image mirror (L-R↔ R-L), sub-sampling,
serial port (IIDC v. 1.31)
Transfer Rate 100 Mb/s, 200 Mb/s, 400 Mb/s
Digital Interface IEEE 1394 IIDC v. 1.3
Power Requirements DC 8 V – 36 V via IEEE 1394 cable or 12-pin HIROSE
Power Consumption Less than 3 Watts (@ 12 V d.c.)
Dimensions 58 mm x 44 mm x 29 mm (L x W x H); without tripod and lens
Mass <120 g (without lens)
Operating Temperature +5 – +45 ° Celsius
Storage Temperature -10 – +60 ° Celsius
Regulations EN 55022, EN 61000, EN 55024, FCC Class A, DIN ISO 9022
Options Host adapter card, locking IEEE-1394 cable, API (FirePackage),
TWAIN (WIA) -and WDM stream driver
Table 10: Specification MF-131B
The design and specifications for the products described above may change without notice.
MARLIN Technical Manual
Page 22