Instruction manual
Guppy Technical ManualV7.4.0
249
Configuration of the camera
Trigger delay
The advanced register allows to delay the start of the integration via DelayTime
by max. 2
21
μs, which is max. 2.1 s after a trigger edge was detected.
Note
If the adjustment fails and the work area size and/or work area
position becomes invalid, then this feature is automatically
switched off.
Read back the ON_OFF flag, if this feature does not work as
expected.
Register Name Field Bit Description
0xF1000400 TRIGGER_DELAY Presence_Inq [0] Indicates presence of this
feature (read only)
--- [1..5] Reserved
ON_OFF [6] Trigger delay on/off
--- [7..10] Reserved
DelayTime [11..31] Delay time in μs
Table 120: Advanced register: Trigger Delay Advanced CSR
Note
Trigger delay woks with external trigger modes only.