Instruction manual

Guppy Technical ManualV7.4.0
244
Configuration of the camera
0xF100029C DPC_MEM Presence_Inq [0] Indicates presence of this fea-
ture (read only)
--- [1] Reserved
EnaMemWR [2] Enable write access from host
to RAM
EnaMemRD [3] Enable read access from RAM
to host
DPDataSize [4..17] Size of defect pixel data to
read from RAM to host.
A maximum of 2000 defect
pixels can be stored. To get
the number of defect pixels
read out this value and divide
by 4.
In case of more than 2000
defect pixels, DPDataSize is
set to 2001 pixels (DPDatasize
of 8004 divided by 4 equals
2001 pixels) and BuildError
flag is set to 1.
Defect pixel correction data is
done with first 2000 defect
pixels only.
AddrOffset [18..31] Address offset to selected
defect pixel data
0xF10002A0 DPC_INFO Presence_Inq [0] Indicates presence of this fea-
ture (read only)
--- [1..3] Reserved
MinThreshold [4..10] Minimum value for threshold
MaxThreshold [11..17] Maximum value for threshold
MaxSize [18..31] Maximum size of defect pixel
data
Register Name Field Bit Description
Table 115: Advanced register: Defect pixel correction